Sub-Zero 700TFI freezer with ice maker repair
A 700TFI pairs the tall all-freezer cabinet with an automatic ice maker, and most are found in older built-in kitchens next to a refrigerator column. Because the ice maker adds a water line and a mold heater to a freezer that is already long in service, the calls we see are split between cooling and ice.
We begin at the grille, since dust there makes the compressor work harder and slows pull-down after the door is opened. From there we check the evaporator fan, the door seal and the ice maker’s fill and harvest cycle. Cloudy cubes usually point to the water supply side, so we look at the inlet before touching the cooling system.
Every job starts with a written price, and the work is backed by our 30-day workmanship warranty.
Slow recovery commonly traces to a dusty condenser, a tired fan or a gasket that no longer seals. We clean and measure airflow first, because those are the least expensive fixes, then move on to sealed-system checks if needed.
Not usually. Cloudy cubes more often come from the water supply or filtration than from the cooling system. We check the inlet valve and water pressure at the ice maker before recommending anything on the freezer itself.
Yes. The 700TFI-RH is a version of the same unit, and we service it the same way as the 700TFI. We identify the exact unit from the serial and rating plate inside the cabinet before ordering any part.
Book in about a minute, or call the desk. Same-day windows inside the Loop on most days, next-day across the rest of Houston.
