Legacy Designer Wine Storage from Sub-Zero, including the IW-24 and IW-30R, uses 35-C-34 for a DC condenser fan speed set too high. The fan that cools the condenser is running on a speed setting above the…
Legacy Designer Wine Storage from Sub-Zero, including the IW-24 and IW-30R, uses 35-C-34 for a DC condenser fan speed set too high. The fan that cools the condenser is running on a speed setting above the range the control allows. Cooling continues, but the grille area may sound louder than normal, and 35 C 34 shows on the display. Nothing is wrong with the wine itself.
1. Listen at the lower grille for a louder or whining fan. 2. Keep the grille clean and uncovered. 3. Remove power at the breaker for a minute, then restore it. 4. Get in touch if 35-C-34 is still displayed. 5. Do not block the grille to muffle the sound, since the condenser still needs airflow.
The condenser fan is running at a higher speed than the control permits, so it moves more air and makes more noise at the grille. That is what 35-C-34 reports.
Yes, in most cases. This code concerns how fast the condenser fan is set to run, not a loss of cooling. Watch the zone temperatures, though, in case that changes.
We check the fan, its wiring and the board output, then correct the cause. We price the job in writing before starting, and our workmanship carries a 30-day warranty.
A technician diagnoses it on site and gives you the price in writing before any work starts.