Sub-Zero UC-24 Code 07: freezer cabinet thermistor reading

What 07 means

Some legacy UC-24 models, like the UC-24F and UC-24CI, have a freezer cabinet and show code 07 when its thermistor reads open, stays shorted for 10 seconds or longer, or produces inconsistent temperatures. The control loses its view of how cold the freezer actually is, so the compressor may run too long or too little. Code numbers overlap with the full-size 600/700 lists; on this undercounter the freezer cabinet sensor is what counts. Watch for soft ice cream, frost on packages, or a freezer that is colder than the setpoint.

Common causes of 07

A freezer cabinet thermistor plug that has worked loose
Wire damage between the freezer sensor and the control
A freezer cabinet thermistor that has failed or drifted
A control board input that no longer reads correctly

✓ One safe check you can try

1. Put a thermometer in the freezer and check it after an hour. 2. Confirm the drawer or door closes fully and the seal is clean. 3. Keep frozen packages away from the rear wall. 4. Cut power at the breaker for one minute and restore it. 5. If 07 returns, move valuable food elsewhere and call us.

! Why to stop there

The sensor wiring runs inside the cabinet walls and behind live panels
Only a resistance test against temperature tells a bad sensor from a bad board
Freezer food can be lost if the guess is wrong

Opening a panel yourself does not automatically cancel a manufacturer warranty, but it can cause accidental damage, and some manufacturers set their own service conditions. Check your warranty terms, or ask us, before deciding.

→Same appliance

Other Undercounter & Drawers codes

EE + Service flashingSub-Zero UC-24 Undercounter EE with "Service" Flashing: temperature sensor problem Service flashingSub-Zero UC-24 Undercounter "Service" Flashing: excessive compressor run 05Sub-Zero UC-24 Code 05: refrigerator cabinet sensor reading 06Sub-Zero UC-24 Code 06: refrigerator evaporator sensor issue 08Sub-Zero UC-24 Code 08: freezer evaporator thermistor 22Sub-Zero UC-24 Code 22: no defrost voltage feedback 23Sub-Zero UC-24 Code 23: defrost overheat without feedback 50Sub-Zero UC-24 Code 50: refrigerator compressor runs too long

0707 questions

My UC-24F shows 07 but the freezer is still cold. Should I worry?

Yes, plan a visit. The control is working without a trusted reading, so it may overcool or let the freezer warm without warning. A thermometer helps you watch it until we arrive.

Is code 07 a compressor problem?

No. Code 07 names the freezer cabinet thermistor on the UC-24. The compressor may act strangely because it is getting bad information, but the sensor circuit is the starting point.

Will it need a new control board?

Usually not. We test the sensor and its wire first, which covers most cases. You get a written price before we replace any part. Board failures on the UC-24F are uncommon by comparison.