Booking today · Houston service windows 9–12 · 1–4 · 4–7 Independent Sub-Zero specialists · Licensed & insured Mon–Fri 7:00 AM - 8:00 PM · Sat 8:00 AM - 6:00 PM
(713) 844-8535 Book a Repair
Model library · Sub-Zero Refrigerator

CL4850S

Sub-Zero CL4850S 48-inch side-by-side refrigerator freezer service

Most common issues on this model

  1. Slow return to temperature after the door stood open
  2. Cabinet cold at night but drifting warm through the day
  3. Frost forming inside the freezer side

At 48 inches wide, 84 inches tall, and 29.1 cubic feet, the CL4850S is a big Classic side-by-side. It tends to be the centerpiece of a big kitchen, built in with a generous cabinet surround and no dispenser on the door.

Size works against recovery time. A cabinet this large needs strong airflow to pull back down after a party or a big restock, so a slow return to temperature sends us to the condenser grille, the fans, and the gaskets. The same checks cover a cabinet that warms up through the afternoon.

Frost is the freezer-side concern. We trace it to the door seal first, then to the defrost cycle and the drain. Dust, grease, and lint are the quiet culprits in a lived-in kitchen, and we clean them as part of any visit. We suggest a light cleaning routine so the results last. Another name for it is ICBCL4850S, the ICB version of this model.

Key features

  • Classic side-by-side that is 48 inches wide
  • Stands 84 inches high with 29.1 cubic feet
  • Still in current production
→Codes

Error codes this model can show

CL4850SCL4850S questions
Why does my CL4850S take hours to get cold again after a restock?

A big cabinet needs good airflow to recover. A dusty condenser, a tired fan, or a leaky gasket stretches recovery time, and we check each one and quote any repair in writing first.

Is some afternoon warming normal on a CL4850S?

A slight rise during heavy use is normal. If it keeps climbing day after day, the seal or condenser airflow is the usual cause, and we can test both in one visit.

What causes frost in the freezer of a CL4850S?

Moist air entering past a worn gasket is the leading cause, followed by a defrost cycle that is not finishing. We check both, and our work is backed by a 30-day workmanship warranty.

Book a visit

Book repair for your CL4850S

Book in about a minute, or call the desk. Same-day windows inside the Loop on most days, next-day across the rest of Houston.

☎ Call the desk ▤ Book a Repair