Sub-Zero 700BC fridge and freezer drawers repair
With a refrigerator drawer above and a freezer drawer below, the 700BC covers two jobs in one slim cabinet. Its integrated design takes custom wood or stainless steel drawer panels in classic, platinum and carbon finishes, so it often disappears into a kitchen island or bar run.
It breathes through the front, behind a removable kickplate, so a dusty or blocked opening is the first place we look when cooling is weak. If the control panel stops responding properly, we check the supply to the board and the sensor readings before suggesting a replacement.
Drawers that no longer sit square will not seal either, and the panel weight can make that worse. This is a discontinued model; OEM parts are generally still available, though they take longer to arrive. We quote in writing first and back the repair with a 30-day workmanship warranty.
We check power to the panel, the wiring and sensor readings before replacing anything. Sometimes the board is fine and the problem sits upstream. You get a written price before any part is ordered.
A kickplate or grille that is blocked by dust, trim or storage hurts the condenser. We clean it and verify airflow, since the unit vents out the front.
They share one cabinet but are affected differently. A bad seal or slide on one drawer shows up there first. We test each drawer on its own and report what we found.
Book in about a minute, or call the desk. Same-day windows inside the Loop on most days, next-day across the rest of Houston.
